- Artigo Nº.: 49052
- Nº do fabricante.: 13120
- EAN: 4250197131209
- Peso: 0,47 kg
> 25 pronto para o envio, prazo de entrega 1-3 dias
Preços incl. VAT mais custos de envio
Alphacool's new power pump series, exceptional performance at an unbeatable price. The 12V pumps can simply be connected directly to the system PSU and the pump will start with your PC for maximum convenience and safety.
This pump is ideal for PC and other electronics water cooling. The DC pump is equipped with an electronically commutated spherical motor. In a pump with a spherical motor the only moving part is a spherically shaped rotor which in this pump is held in place by a bearing ball made of ultra-hard and wear-resistant ceramic. The spherical bearing of the rotor offers many advantages: For example an increase of bearing play is impossible due to the design, allowing the pump to run quietly and smoothly over its whole lifespan. A separate magnetic shielding of the pump is not needed.
The ball motor design allows efficient operation of the pump in combination with excellent performance. The pump can simply be connected to a 12V Molex connector of the system PSU.
The special feature of this model is the ability to be adapted to all common hose sizes via a sleeve. Another feature is the ability to be adjusted in five speed settings via a lever on the pump.
Dimensions (WxHxD): 90x90x90mm (without connectors)
Motor: Electronically commuted spherical motor
Rated voltage: 12V DC
Power consumption: 23W
Permitted voltage range: 8-24V DC
Pressure head at 12V: 3,7m
Maximum flow: 1500l/h
Pumped media: Water, water/glycol mixtures
Maximum system temperature: 60°C
Materials: Stainless steel 1.4571, PPS-GF40, EPDM O-rings, Aluminium oxide, hard coal
Connectors: 2x 1/2“ outer threads
Special features: Adjustable in five steps
Step 1: 1800 rpm
Step 2: 2550 rpm
Step 3: 3300 rpm
Step 4: 4050 rpm
Step 5: 4800 rpm
Power connector: 4 Pin Molex
Extent of delivery:
1x Alphacool VPP655 -OT12 (G1/2" outer threads)
Datasheet D5 Pump VPP655
Please note: Pump control possible with Heatmaster!
Note: To adapt to G1/4 inch inside thread, we recomment ordering the articel number: 64125 and 64044 two pieces of each fitting.
Note: For pump control via the Heatmaster the Alphacool pump adaptor cable (Item No. 52171) is required!
The installation manual you can find here as Download
This product has been reviewed for you:
xtremesystems (engl. Userreview)
Coldzero (pt) (Userreview)
Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.
We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.
Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
|Faixa de controle possível:||8-24V DC|
|Fluidos aprovados:||Water, Water/ glycol mixture|
|Max. Temperatura do sistema:||60° C|
|Max. Cabeça de descarga:||Good (2 to 4m), 3,7m|
|Max. Fluxo:||Extreme (more than 1400l/h), 1500l/h|
|Conector de força:||4Pin Molex|
|Entrada de energia:||23W|
|Dimensões:||90 x 90 x 90 mm|
|Entrada de água:||G1/2" outer thread|
|Saída de água:||G1/2" outer thread|
Clique aqui para exibir esta (s) pergunta (s).